Differences

This shows you the differences between two versions of the page.

--- userdoc:xerox_wc6400_printing [2015/04/14 15:58] – created prall
+++ userdoc:xerox_wc6400_printing [2015/04/14 16:05] (current) – prall
@@ Line 1: / Line 1: @@
+====== How to set up printing to Xerox WC6400 ======
+The Photonics group has a Xerox multifunction WorkCentre 6400 printer / scanner in Beverly's office in GB436.
+This printer has page accounting enabled; each professor has a unique access code number.
+The printer is networked on the Admin Tier 1 network, managed by Roland Tan r.tan@utoronto.ca.
+For users on Tier 2 network connections, the ECE firewall has a rule allowing TCP port 9100 access to this printer's IP from tier 2.
+Below are setup steps for adding this printer on a Windows or Mac computer.
+===== Xerox WorkCentre 6400XF – PC BASED =====
+-	http://www.support.xerox.com/support/global-printer-driver/downloads/enus.html?operatingSystem=win7x64
+Download and install the postscript 64-bit driver from the above link.
+Printer Address
+============================
+IP address:  128.100.237.118
+Subnet Mask: 255.255.255.128
+Gateway: 128.100.237.2
+- Follow the instructions on the screen.
+- Add your user ID:
+Go to Control Panel > devices and printers >  right click on the printer >  select: properties > then configuration>  then Accounting:  Choose Xerox Standard accounting;
+             Choose DO NOT PROMPT at Print-Time;
+             Enter Default accounting code
+             (your usual 3 digit user ID;  if you are new and
+                want access, ask Beverly for one)
+===== Xerox WorkCentre 6400XF – MAC BASED =====
+  - Launchpad, system pref, open Print and Scan
+  - Add printer (+);
+  - Select IP in new window:
+  - Protocal:  Choose HP Jetdirect (this is the one I missed)
+  - Address:  128.100.237.118
+  - Print using:  Generic Postscript Printer
+  - hit 'add' button
+  - Print & Scan Window:  Select Options and Supplies
+  - Select Driver Tab
+  - Print Using: Select "Select Printer Software'
+  - search and select Xerox Workcentre 6400XF;  OK
+(If you cannot find this, then try to download the MAC OS driver from Xerox web site)
+  - Print any document, and in Printer Window:
+   * select the printer you just created
+   * Select Xerox Features (search buttons)
+   * Search and select Advanced
+   * Scroll to find Configuration: select Accounting
+  - In accounting window:
+   * Select Xerox General Accounting or Auditron
+   * Insert your usual 3 digit code in 'default User ID'
+   * Default accounting type:  select 'Default Group account'
+  - Hit OK and select Print and it should work.
+------------------------------------